Komatsu — MAINTENANCE INFORMATION

. MAINTENANCE MAINTENANCE INFORMATION into the oil. 4 - 3 Clean electrical co mponents, especially the starting moto r and alternator, to avoid a ccumulation of dust When inspecting o r changing the oil, move the machine t o a place that is free of dus t to prevent dirt from getting Avoid Mixing Lubrica If a different brand or grade of oil has to be added, drain the o ld oil and replace all the oil with the new brand o r grade of oil. Never mix diffe Locking the Inspectio n Covers r securely into position with the lock bar.

If inspection or maintenance is performed with Lock inspection cove with inspection cover not l ocked in position, there is a danger tha t it may be suddenly blow shut by t he win d an d cause injury to the worker. Hydraulic System - Ai r Bleeding When hydraulic equip ment has been repaired or replaced, o r the hydraulic piping has bee n removed and i nstalled again, the air must be bled from the circuit. For details, see " BLEEDING AIR FROM HYDRAULI C SYSTEM (PAGE 4-40)". Hydraulic Hose Install ation arts at locations where there are O-rings or gasket seals, clean the mounting surface, and arts. e careful not to forget to assemble the O-rings and gaskets.

When removing p replace with new p When doing this, b e careful not to forget to assemble the When installing the hoses, do not twist them or bend the m sharply. If they are installed so, t heir service life will be shortened extre mely and they may be damaged. surface, and Checks After Inspection and Maintenance Works If y ou forget to perform the checks after inspection and maint enance, unexpected problems may occur, and t his may lead to serious injury or property damage. Always do the fo llowing: rgotten? ormed correctly?

Checks after opera tion (with engine stopped) Have any inspe Have all inspec Have any tools inside the mach Are there any le Have any inspe ction and maintenance points been fo Have all inspec tion and maintenance items been perf Have any tools or parts been dropped inside the mac hine? It is particularly dangerous i f parts are d ropped ine and get caught in the lever linkage Are there any le akage of coolant or oil? Have all nuts and bolts been tightened?

Checks when oper For details of th ENGINE IS RU Are the inspecti Is there any lea For details of th NNING (PAGE 2-34)" and pay careful Are the inspecti on and maintenance items working pr Is there any lea kage of fuel or oil when the engine sp MAINTENANCE WHEN