. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE CHECK NITROGEN GAS CHARGE PRESSURE IN ACCUMULATOR (control circuit) in the 4 - 43 3. Loosen oil fi ller cap (F) at the top o f the hydrauli c tank slowl y to release the internal pressur NOTICE If the nitrogen ga s charge pressure i n the accumulator is low an d operations are c ontinued, it will bec ome imp ossible to r elease the r emaining pressure in side the h ydraul ic circuit if a fa ilure o ccurs o n the machine. Check the n itrogen gas charge pressure a s f ollow s. 1. 1. Se t t he wor k equip ment to maximum reach as sho t. maximum diagram on the righ 2.
Stop the engine an d carry o ut the LOWE R operation for th 3. Check t hat the tip o f the bucket d rops at l east 1 m (3 If the tip of t he buck et drops less than 1 m (3 ft ), the charg e pressure inside the accumulator is low, so co ntact your Komatsu distr ibutor.