. MAINTENANCE MAINTENANCE PROCEDURE CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL WARNING is stopped and may cause serious burns. Wait for the oil 1. Remove dipstick (G) and wipe the oil from the cloth. 4 - 48 EVERY 250 HOURS MAINTE Maintenance for every 50 hours ser vice should be carried out at the sam mediately after the engin temperature to go down before performi ng this operation dipstick with 2. Fully inse rt dipstick (G) into the 3. When dip stick (G) is pulled out, if oil level is between the H an f the gauge, oil level is oes not reach the L ma h dipstick insertion hol illing, remove bleeding 5.
If the oil is above the L mark on t he dipstick, loosen drai n valv rain the excess oil. s of the method of drain ing the oil, see "CHANGE OI G MACHINERY CASE (PAGE 4-69)" 6. After che cking oil level or adding oil, insert the dipstick i nto th install air bleeding plug