. MAINTENANCE MAINTENANCE PROCEDURE CHECK AIR CONDITIONER COMPRESSOR BELT TENSION, ADJUST pressed with a finger force of approx. 58.8N (6 kgf) at mid-point (a) between the crankshaft pulley and the compressor pulley. (A): Compressor pulley (B): Crankshaft pulley 4 - 54 3. Check for dam age to the pulleys, a nd wear of the groove and belt. Be particularly care ful to check that the bel s not in contac t with the bottom of the groove. 4. I f the belt has e longated and there is no more allo wance for adjustment, or if the belt i s cut or cracked, replace he belt. 5. After replacing the belt, operate for one hour, then adjust again.
Checking The deflection of t he belt should be 14 to 16 mm (0.6 in) when The Adjustment ) and (2), then move compressor (3) to adjust . ction is correct, tighten bolts (1) and (2) to hold r in position. ge to the pulleys, and wear of the V-groove and 1. t 2. t 3. 4. I 5. 1. Loosen bolts (1 he belt tension When the defle he compresso Check for dama V-belt. Be parti contact with th f the belt has cularly careful to ch e bottom of the V-gr elongated and ther eck that the V-belt is not in oove. e is no more allowance for adjustment, or After replacing if the belt is cut or cracked, replace the belt. the V-belt, operate for one hour, then adjust again. e compressor ( 3) to adjust