Komatsu — REPLACE FUEL FILTER CARTRIDGE (MACHINES EQUIPPED WITH ADDITIONAL FUEL FILTER CARTRIDGE)

. MAINTENANCE MAINTENANCE PROCEDURE 4 - 67 4. Whe n installing, tighten un til the packing surface co ntacts the seal surface of the filte r holder, then tighten it 3/4 of a turn. If th e filter cartridge is tigh tened too far, the packing will be d amaged and this will lea d to leakage of fuel. If the filter cartridge is too loose , fuel will also leak from t he packin g, so always tighten the 5. Afte r completion of the re placement of fuel filter ca rtridge (1) Bleed th e air as follows: 6. Add fuel to the fuel tank u ntil full (to FULL mark on the fuel g 7. Afte r replacing filter cartri dge (1), loosen air bleed plug (B) i the f ilter head (2). 8.

Loosen the knob of primin g pump (3), then pump the knob un 9. no more bubbles come ou Tighten air bleed plug (B). Tightening torque: 4.9 to lbft) 10. Push the knob of priming 11. Afte r replacing the filter ca rtridge, start the engine a nd check that there is no leakage of fuel from the filter seal surface. If there is any lea kage of fuel, check the tig htening o f the filter cartridge. If th ere is still leakage of fuel, follo w Step 1 and 2 to rem ove the filter cartridge, the n check t he packing surface for d amage or foreign material.

If an y damage or foreign m aterial is found in the pack ing, repla ce the cartridge with a n ew part, then repeat Steps 3 - 1 0 to install the filter c artridge.