Engine Tier-3 710655- Ch 1 page 131 Thermostat and thermostat housing The engine have a double thermostat. When a double thermostat are used they have the same opening temperature as standard. The thermostats use wax as the temperature-sensitive me dium. At coolant temperatures below the opening temperature of the thermostats, nearly all the coolant circulates between the engine’s coolant passages and the coolant pump without passing through the radiator. When the coolant temperature in the engine is higher than the temperature for fully open thermostat, the by-pass channel is closed and all coolant flows through the thermostats and on to the radiator.
If temperature equilibrium occurs within the operating range of the thermostats, i.e. between the temperature limits for fully closed and fully open thermostat, the thermostat valves will assume a corresponding intermediate position. Some of the coolant will then be directed to the coolant pump without being cooled and the remainder directed to the radia tor. 1. Termostat housing 2. Thermostat 3. Gasket 4. Cover 5. Stud 6. Flange nut Open thermostat - full flow to radiator Closed thermostat - return to coolant pump trough by-pass channel 3 2 1 1 1.Coolant from the engine 2.By-pass channel (back to the coolant pump) 3.Outlet to the radiator SHOP MANUAL MT26-31 - 06.2005