Scania — Thermostat

Engine Tier-3 710655- Ch 1 page 132 Thermostat Removing 1. Remove the expansion tank filler cap. Drain a sufficient amount of coolant from the system. 2. Remove the hose from the thermostat housing cover. Detach the thermostat housing cover and remove the thermostat (double thermostat). Fitting 1. Clean the thermostat housing and check that nothing obstructs the function of the thermo­stat. 2. Insert the thermostat in the housing. Fit new gaskets and screw the thermostat housing together. 3. Fill the system with coolant. See OPERATING & MAINTENANCE MANUAL chapter 7 for the composition of the coolant. 4.

Start the engine and check that there are no leaks.Check the coolant level and top up as necessary. SHOP MANUAL MT26-31 - 06.2005