Scania — Coolant/water in oil

Engine Tier-3 710655- Ch 1 page 150 Coolant/water in oil SHOP MANUAL MT26-31 - 06.2005 Effect Cause Troubleshooting Action Dilution of oil in sump Dilution of oil in sump Oil cooler leaks when engine is not running Test pressurize the oil cooler, see above Leaky O-rings at cylin­der liner Leakage in telltale hole? Change liner seals Water is condensed in crankcase ventilation and runs down into the sump Crack in cylinder head Run the engine until warm. Remove the oil sump and all side covers. Test pressurize the cool­ing system. If coolant seeps out behind side covers or at the camshaft bear­ ing there is probably a crack in one of the cylinder heads.

As a rule it is possible to see which cylinder head or heads are leaking. Change the cylinder head for a exchange cylinder head. If no leakage can be found, change all cylin­ der heads for exchange cylinder heads. Crack in water jacket on cylinder block/cyl­ inder head. (Coolant runs down through the push­rod hole.) Crack in water jacket on cylinder head. (Coolant runs down via the oil duct for rocker arm lubrication.) Leakage in charge air cooler core Test pressure (air 0.5 bar, liquid 4 bar)