Scania — Vibration, no driven components engaged

Engine Tier-3 710655- Ch 1 page 154 Vibration, no driven components engaged SHOP MANUAL MT26-31 - 06.2005 Effect Cause Troubleshooting Action Wrong injection timing Broken delivery valve spring Disconnect one delivery pipe at a time and listen for changes in the engine sound. WARNING!

Be careful when disconnecting the delivery pipes as the pressure is extremely high and could cause injury Individual injectors not operating Fan imbalance Flywheel has come loose Crankshaft hub loos­ ened Abnormally worn main bearings Vibration or unusual noise at 1500 - 1700 r/min Defective vibration damper Drive belts run off pul­ leys Only when com­pressed air compres­sor is charging, worst at about 1000 r/min, see also page xx Compressor operates with excessive counter­ pressure (e.g. clogged piping/air dryer) or excessively high safety valve opening pressure Alignment fault Check engine align­ ment