Scania — Hot engine

Engine Tier-3 710655- Ch 1 page 161 Hot engine SHOP MANUAL MT26-31 - 06.2005 Effect Cause Troubleshooting Action Instrument shows high temperature Defective sensor/instru­ ment Check that sensor and instrument suit each other (120 and 150 °C) Check with a separate instrument Low coolant level Clogged cooling sys­ tem Clean the cooling sys­tem internally and externally Pressure cap not operat­ing Test pressurize Impeller on coolant pump worn or dam­ aged Cooling capacity too low Take a reading of the cooling capacity Gas leakage (causes loss of coolant) Defective thermostats Check opening tempera­ture of thermo­ stats Reduced coolant flow Drive belts slip or pump wheel loose on pump shaft Air pockets in engine’s outer cooling circuit Vent at the cooling sys­ tem’s highest point Check that the ventila­ tion piping to the expansion tank is not clogged Excessive pressure drop in the external cooling system Check with forcibly opened thermostats Clogged radiator Circulation of cooling air Check by taking tempera­ ture readings Cavitation damaged impeller in coolant pump Leakage in charge air cooler