Engine Tier-3 710655- Ch 1 page 49 10. Remove the fork clamp bolt holding the unit injector in place. 1. Fork clamp 2. Fork clamp bolt 3. Unit injector 11. Detach the cables on the unit injector. The screws cannot be removed but undo them as far as possible. Note: Do not lift the unit injector by the spring. The spring can come loose. 12. Turn the unit injector anti-clockwise until it stops. Place the slide hammer 87 596 between the solenoid valve and the edge of the lower rocker cover as illustrated. Note: If the slide hammer is placed directly under the solenoid valve, there is a risk of breaking the solenoid valve. Place the slide hammer as indicated by the arrow.
SHOP MANUAL MT26-31 - 06.2005