Scania — Valve mechanism

Engine Tier-3 710655- Ch 1 page 48 WARNING! ! Do not lean over the engine when removing the rocker arm shaft. The unit injector spring is pre-tensioned and can come loose, causing personal injury. Note: If the spring comes loose from the unit injector, the unit injector must be renewed. 5. Remove the rocker arm shaft. 6. Remove the bearing bracket. 7. Remove the pushrods. Note: The pushrod for the unit injector is secured with a retaining ring. Jiggle and pull carefully on the pushrod to loosen it. 8. Remove the valve bridges. 9. Remove the lower rocker cover. SHOP MANUAL MT26-31 - 06.2005