Scania — Valve mechanism

Engine Tier-3 710655- Ch 1 page 47 1. Open the bleeder nipple and drain the fuel system by undoing the banjo screw on the back of the fuel manifold. WARNING! ! The fuel system must be empty or fuel may run down into the cylinders, which will result in a great risk of liquid hammering. If fuel runs into the combustion chamber, it must be removed immediately using a pump. 1. Bleeder nipple 2. Banjo screw 2. Clean the rocker cover and the surrounding area. 3. Remove the top part of the rocker cover. 4. Relieve the pressure on the valves by undoing the bolts on the rocker arm shaft alternately. SHOP MANUAL MT26-31 - 06.2005