Scania — Fitting the cylinder liners

Engine Tier-3 710655- Ch 1 page 87 Fitting the cylinder liners 1. Check cylinder liner height as described in the section entitled Measuring the cylinder liner height. 1. Check cylinder liner height as described in the section entitled Measuring the cylinder liner height. 2. Make sure the interior of the cylinder block is clean. Clean the O-ring surfaces. 2. Make sure the interior of the cylinder block is clean. Clean the O-ring surfaces. 3. Check that the holes for coolant going to the cylinder head and cylinder liner are not clogged. 3. Check that the holes for coolant going to the cylinder head and cylinder liner are not clogged. 4.

Carefully check the cylinder liners, both new and old, for cracks which might have arisen during transport or careless handling. 4. Carefully check the cylinder liners, both new and old, for cracks which might have arisen during transport or careless handling. 5. Tap the liner carefully with a metal object. It should give a clear metallic ring if it is intact. If it sounds cracked, renew it. 5. Tap the liner carefully with a metal object. It should give a clear metallic ring if it is intact. If it sounds cracked, renew it. 6. Lubricate the sealing ring to be fitted in the cylinder block with engine oil and fit it in place. 6.

Lubricate the sealing ring to be fitted in the cylinder block with engine oil and fit it in place. 7. Lubricate the sealing ring to be fitted in the cylinder liner with engine oil and fit it in place. 7. Lubricate the sealing ring to be fitted in the cylinder liner with engine oil and fit it in place. 8. Turn the liner with the stamped cylinder number facing forward and carefully tap it down with a rubber mallet. 8. Turn the liner with the stamped cylinder number facing forward and carefully tap it down with a rubber mallet. 9. Fit the scraper ring in place after the piston has been fitted. 9. Fit the scraper ring in place after the piston has been fitted. SHOP MANUAL MT26-31 - 06.2005