8. Lubrication System Oil pump General Information Engine oil is sucked from the oil pan by the gear type oil pump and then all of the oil is forcibly delivered to the oil cooler and filter for filtering. The filtered oil passes through the main oil path of the cylinder block and lubricates bearing parts and the turbocharger of the engine in order to maintain normal engine performance. 4. Remove the timing gear case. A Oil Pump Disassembly B 1) Place a container under the engine to drain the 1. Drain the engine oil. engine oil. D E C 2) Remove the oil cap. 3) Remove the drain plug and drain the engine oil. EDL013037A WARNING 1) Loosen the fixing bolt (D).
2) Remove the crank speed sensor (C). Discard oil according to the regulations set forth by the relevant authorities. Disposing of discharged oil into the ground, sewers, drains, rivers, or the sea will cause serious environmental pollution. Violation of regulations when discarding engine oil without observing the handling regulations, will be punished. 3) Loosen 16 hex bolts (B). 4) Remove the timing gear case (A). CAUTION Do not reuse the oil seal; replace them with new ones. 2. Remove the V-belt. 5. Remove the timing wheel. 3. Remove the crankshaft pulley. A A B EDL013038A EDL013033A 1) Remove the timing wheel (A). 1) Loosen the flange hex bolt (B). 2) Remove the crankshaft pulley (A).
CAUTION Be careful not to damage the oil seal. 8 - 6