Doosan Infracore D18NAP — Oil Pump Assembly

8. Lubrication System 6. Remove the oil pump. CAUTION Make sure that the O-rings have been mounted. Be careful not to damage the O-rings while mounting them. B 2. Attach the timing wheel. A C A EDL013041A 1) Loosen 4 hex bolts (C). 2) Remove the oil pump (B). 3) Remove 2 O- rings (A). Oil Pump Assembly EDL013038A 1. Attach the oil pump. 1) Attach the timing wheel (A). CAUTION B Be careful not to damage the teeth of the timing wheel. 3. Attach the timing gear case. A C EDL013041A 1) Align 2 O-rings (A) to the engine oil inlet and outlet. E 2) Align the oil pump (B) with the pin and press it to the cylinder block as much as possible.

A 3) Tighten 4 hex bolts (C) at a tightening torque of 2.2 kgf•m. 4) The backlash between the crankshaft gear and the oil pump gear is 0.006 ~ 0.259 mm. EDL013052A 8 - 7 Item Specified Backlash between t crankshaft gear and the oil pump ge he 0.06 ~ 0.2 ar