8. Lubrication System Assembly of Oil Suction Pipe and Oil Delivery Pipe 1. Attach the oil suction pipe and oil delivery pipe. B C A B D A EDL013034A 11 7 6 10 22 2 3 EDL013035A 1) Attach 3 O-rings (A). 2) Attach the oil suction pipe and the oil delivery pipe 21 12 (B). 20 13 3) Tighten 2 hex bolts (C) at a tightening torque of 19 14 1.0 ± 0.3 kgf m. 4) Tighten 3 hex bolts (D) at a tightening torque of 2.2 ± 0.3 kgf m. 18 15 CAUTION 17 9 5 1 4 8 16 EDL013055A Ensure that the O-rings of the inlet and the outlet have been mounted. 1) Apply LOCTITE 5902 to the oil pan assembly Be careful not to damage the O-rings while mounting them. surface(C) with the diameter of ш 3 ± 0.5 mm. CAUTION 2.
Attach the oil pan. Keep clean liquid gasket dispensing surface. Dispensing line should not be snapped. C 2) Attach the oil pan (A). CAUTION Be careful that the oil pan has been attached in the right direction. Assemble oil pan in 5 minutes after dispensing liquid gasket. Do not pressurize inside oil pan in 25 minutes after dispensing liquid gasket. 3) Tighten 22 flange hex bolts (B) at a tightening torque of 2.2 kgf m. EDL013054A 8 - 10