10. Intake/Exhaust System Intake Manifold Disassembly of Intake Manifold 3. Remove the common rail and the injection pipes. 1. Remove the EGR connection pipes. A C A B E D B EDL013004A EDL013006A 1) Loosen 6 fixing bolts (B). 1) Loosen the fixing bolt (E). 2) Loosen the nuts of the fuel injection pipes. 2) Remove the EGR pipes (A). 3) Remove 4 fuel injection pipes (C) and (D). 3) Remove 4 gaskets. CAUTION 2. Remove the intake stake. Do not reuse fuel injection pipes; replace them with new ones. If fuel injection pipes are reused it may allow foreign substances into the fuel pipes or cause oil leaks from bolt clamping and cause a critical fault in engine performance.
C D 4) Loosen 2 collared hex bolts (B) of the common rail. 5) Remove the common rail (A) from the intake manifold. A B 4. Remove the oil filter assembly. D EDL013005A C 1) Loosen the flange hex bolt (D). 2) Remove the boost pressure sensor (C). 3) Loosen 3 flange hex bolts (B). 4) Remove the gasket and the intake stake (A). A B EDL01300 9 A 2) Disconnect the coolant hose (C). 1) Loosen thefixing bolt (D). 3) Loosen 5 flange hex bolts (B). 4) Remove the 3 O-rings and the oil filter assembly (A). 10 - 5