10.
Intake/Exhaust System 10 - 12 Phenomenon Causes Troubleshooting Black and white emissions Deformed or damaged intake unit hose Replace it Contaminated or damaged air filter Replace and check if the impeller of the turbocharger is damaged Leakage of coolant from the turbocharger or oil from the oil hose Replace the hose and the gasket Poor turbo actuator operation Replace the turbocharger Contaminated blowby gas and abnormal oil amount Check the turbo impeller and the turbo intake outlet Large gap of the turbocharger wheel, causing interference with the wall Check if there is any sand or metallic foreign substance Damaged turbocharger wheel Check if there is any sand or metallic foreign substance Damaged wheel and shaft of the turbocharger Check if there is any sand or metallic foreign substance Poor rotating force of the turbocharger wheel Check if there is any sand or metallic foreign substance Blue emissions Leakage from the engine block and the exhaust manifold Check the engine Too much fog Oil leakage to the turbine or compressor Repair or replace it Worn or damaged seal ring due to worn bearing Repair or replace it Too much exhaust emissions Clogged air filter element Replace or clean it Clogged air duct Check or repair it Air leakage from the intake system Check or repair it The turbocharger cannot rotate because of burning Repair or replace it A turbine blade or compression wing contacts with the other one or is damaged Repair or replace it Deformed or clogged exhaust system pipe Check or repair it