10. Intake/Exhaust System 3. Remove the EGR cooler assembly and the cam position sensor. CAUTION Exhaust gas make engine parts extremely hot. Only remove the parts when they have fully cooled to prevent burns. A 5. Disassemble the exhaust manifold pipe. (Only B TYPE-1) C E C B D EDL013015A A 1) Loosen the fixing bolt (E). 2) Remove the cam position sensor (D). 3) Disconnect the rubber hoses (C). 4) Loosen 3 flange hex bolts (B). 5) Remove the EGR cooler assembly (A). CAUTION 1) Loosen 3 fixing bolts (A). EDL013079A Exhaust gas make engine parts extremely hot. Only remove the parts when they have fully cooled to prevent burns. 2) Remove the heat screen (B) from the exhaust manifold pipe (C).
6. Remove the exhaust mainfold. 4. Remove the exhaust manifold pipe (Only TYPE-1). 1 A C B C A B D EDL013018A EDL013017A 1) Loosen 3 flange hex nuts (C). 2) Loosen 3 flange hex bolts (B). 3) Remove the exhaust manifold pipe (A). Note) The exhaust mainfold pipe (A) is only TYPE-1. 10 - 18