10. Intake/Exhaust System 1) Attach the breather hose(A). 2. Remove the turbocharger. CAUTION 1 A B Do not reuse the clamps but replace with new ones. Disassembly of Exhaust Manifold D 1. Remove the breather hose. 1 C E A EDL013007A 2 A EDL013001A B 2 C A D EDL013008A 1) Disconnect the oil return pipe. Note) The oil return pipe is that TYPE-1 is (E) and TYPE-2 is (D) . 2) Loosen 2 hollow screws from the oil delivery pipe. Note) Loosen the fixing bolt(D) if the engine is TYPE-1. 3) Disconnect the oil delivery pipe (C). EDL013002A 4) Loosen 4 flange hex nuts (B) 1) Remove the breather hose (A). 5) Remove the gasket and the turbocharger (A).
CAUTION Do not reuse the clamps but replace with new ones. 10 - 17