10. Intake/Exhaust System Exhaust Gas Recirculation (EGR) System To reduce Nox emission from the engine, EGR circulates the exhaust gas of which oxygen concentration is very little to the intake system. As a General Information Exhaust Gas Recirculation ( EGR ) System circulates some of the exhaust gas from the engine to the intake side, cools the gas, and then delivers the cooled gas to the engine for recombustion in order to reduce Nox result, low temperature combustion occurs in the engine and the NOx emission is reduced. emission. The EGR cooler is used to reduce NOx emission and enhance engine combustion efficiency by reducing temperature of high-temperature exhaust gas.
3 4 5 1 8 6 7 2 9 11 10 EDL013080A 1. Intake 4. Throttle valve 7. Exhaust 10. DOC 2. Compressor 5. EGR cooler 8. EGR Valve 11. Exhaust 3. Charge air cooler 6. Intake 9. Turbine 1. Introduction to EGR 2) Motor-driven electric EGR valve is usedto adjust the EGR rate. 1) EGR is a system that reduces Nox emission by recirculating some of exhaust gas according to the engine conditions. 2) The exhaust gas is piped from the exhaust manifold, mixed with the intake coming from the intercooler, and then flows into the engine. 2. Key Characteristics of EGR 1) EGR cooler is used to reduce the temperature of exhaust gas. 3.
EGR cooler summary 1) The EGR cooler is a heat exchanger which reduces the high temperature of the circulated exhaust gas. 2) With the EGR cooler, the EGR engine can reduce Nox emission and enhance fuel efficiency. 4. Key Characteristics of EGR 1) General tube types are used. 10 - 22