Doosan Infracore D18NAP — Assembly of EGR Cooler

10. Intake/Exhaust System Disassembly of EGR Cooler Assembly of EGR Cooler 1. Remove the EGR connection pipes. 1. Attach the EGR cooler assembly and the cam position sensor. A A B C B E D EDL013004A 1) Loosen 6 fixing bolts (B). EDL013015A 2) Remove the EGR pipes (A). 1) Attach the EGR cooler assembly(A). 3) Remove 4 gaskets. CAUTION 2. Remove the EGR cooler assembly and the cam Be careful to note the direction when mounting the EGR cooler. position sensor. 2) Tighten 3 flange hex bolts(B) at a tightening torque 3) Connect the rubber hoses(C) of 3.1 kgf m. A 4) Attach the cam position sensor(D). 5) Tighten the fixing bolt(E). B 2. Attach the EGR connection pipes.

C E A D EDL013015A 1) Loosen the fixing bolt (E). 2) Remove the cam position sensor (D). 3) Disconnect the rubber hoses (C). 4) Loosen 3 flange hex bolts (B). B 5) Remove the EGR cooler assembly (A). CAUTION EDL013004A Exhaust gas make engine parts extremely hot. Only remove the parts when they have fully cooled to prevent burns. 1) Attach 4 gaskets. 2) Attach the EGR pipes(A) 10 - 23