Doosan Infracore D18NAP — Disassembly of Cylinder Head Cover

11. Cylinder block/head 4. Remove the right and left cylinder head cover. CAUTION A Do not reuse the injector seal ring washers. Reuse of the injector seal ring washers may cause B critical damage to the engine due to unstable combustion. C D 6. Remove the cylinder head cover. A EDL013025A B 1) Loosen 8 flange hex bolts (D). 2) Remove the right cylinder head cover (C). 3) Loosen 10 flange hex bolts (B). 4) Remove the left cylinder head cover (A). 5. Remove the injectors. EDL013027A B 1) Loosen 10 hex bolts (B). 2) Remove the cylinder head cover (A). D C A EDL013026A 1) Loosen 3 hex bolts (D). 2) Remove 3 injector fixtures (C). 3) Remove 4 injectors (B).

4) Remove 3 injector seal ring washers (D). CAUTION Do not reuse the head cover rubber seal and the injector oil seal but replace with new ones. Be careful not to damage the injector oil seal of the cylinder head cover. Remove it by turning the injector slowly from left to right. 11 - 12