Doosan Infracore D18NAP — Assembly of Oil Pan

11. Cylinder block/head Oil Pan Disassembly of Oil Pan Assembly of Oil Pan 1) Place a container under the engine to drain the 1. Drain the engine oil. 1. Attach the oil pan. engine oil. C 2) Remove the oil cap. 3) Remove the drain plug and drain the engine oil. WARNING Discard oil according to the regulations set forth by the relevant authorities. Disposing of discharged oil into the ground, sewers, drains, rivers, or the sea will cause serious environmental pollution. Violation of regulations when discarding engine oil without observing the handling regulations, will be punished. EDL013054A 2. Remove the oil pan. A A B B EDL013034A EDL013034A 1) Loosen 22 flange hex bolts (B).

11 7 6 10 22 2 3 2) Remove the oil pan (A). 21 12 20 13 14 19 18 15 17 9 5 1 4 8 16 EDL013055A 1) Apply LOCTITE 5902 to the oil pan assembly surface(C) with the diameter of ш 3 ± 0.5 mm. 11 - 16