11. Cylinder block/head Rocker Arm 2. Remove the common rail and the injection pipes. Disassembly of Rocker Arm C 1. Remove the breather hose. A 1 B E D A EDL013006A 1) Loosen the fixing bolt (E). 2) Loosen the nuts of the fuel injection pipes. EDL013001A 3) Remove 4 fuel injection pipes (C) and (D). CAUTION 2 A Do not reuse fuel injection pipes; replace them with new ones. If fuel injection pipes are reused it may allow foreign substances into the fuel pipes or cause oil leaks from bolt clamping and cause a critical fault in engine performance. 4) Loosen 2 collared hex bolts (B) of the common rail. 5) Remove the common rail (A) from the intake manifold. 3. Remove the fuel return hose.
B 1) Remove the breather hose (A). EDL013002A A C CAUTION Do not reuse the clamps but replace with new ones. B EDL013022A 1) Loosen the flange hex bolts (C). 2) Remove the hose clips and disconnect the fuel hose (A). 11 - 21