11. Cylinder block/head Check of Valve Spring 4. Check the tension of the valve spring. 1. Check the exterior of the valve spring with naked eye. 1) Check if the exterior of the valve spring is damaged with naked eye. Replace it with a new one if required. 2. Check the free length of the valve spring. A EDL022098B 1) Measure the tension of the valve spring with the spring tester (A). Note)If the measurement value is abnormal, replace the valve spring with a new one. EDL022096A Assembly of Valve 1) Measure the free length of the valve spring with 1. Mount the valve. the vernier calipers.
Note)Refer to Chapter 6 (Procedure of Assembling an Engine) Note)If the length is too small, replace the valve spring with a new one. 3. Check the valve spring squareness. B A C EDL022097A A. Free length B. Squareness C Right-angle square 1) Measure the squareness of the valve spring with Note)If the measurement value is abnormal, replace the valve spring with a new one. the surface plate and the right-angle square. 11 - 20