Doosan Infracore D18NAP — Measurement of Gap between Piston and Valve

11. Cylinder block/head Measurement of Valve Step Height Measurement of Gap between Piston and 1. Measure the height of the contact surface of the Valve intake and exhaust valve. If the measurement 1. Detach the cylinder head. value is over the allowable limit, it means that the valve seat is worn. Replace the valve seat. 2. Prepare measurement of the gap between the 2. Measure the valve step height. piston and the valve. D A D B C A B C EDL022094A 1) Put the valves in the valve seat of the cylinder 1) Prepare the lead with thickness of 3mm. 2) Position the greased lead on total 16 points (A, B, head and measure how deep the valves have C, and D) on the top of each piston.

been put from the cylinder head bottom surface with the dial gauge. 3) Attach the cylinder head. 2) Measure 4 points (A, B, C, and D) of the valve. 4) Rotate the crankshaft pulley in order to move the piston. 3) The standard measurement value of the intake 5) Detach the cylinder head. 4) The standard measurement value of the exhaust valve is within the range of 0.6 ~ 0.9 mm. valve is within the range of 0.9 ~ 1.2 mm. 3. Measure the gap between the piston and the valve. 1) Measure thickness of the lead with the vernier calipers. 2) The standard value of gap between the piston and the intake valve is within the range of 1.12 ~ 2.29 mm .

3) The standard value of gap between the piston and the exhaust valve is within the range of 1.44 ~ 2.58 mm . 11 - 19 A B C EDL022095A D A B C EDL02209 Item Specified Value Intake Valve Step Height 0.6 ~ 1.8 mm Exhaust Valve Step Height 0.9 ~ 1.5 mm Item Specified Value Gap between the piston and the intake valve 1.12 ~ 2.29 mm Gap between the piston and the exhaust valve 1.44 ~ 2.58 mm