Doosan Infracore D18NAP — Knock Sensor1(KNOCK1)

12. Electric System Crank Shaft Position Sensor (CRK) A sensor that senses the position of the crankshaft in order to sense the engine rotation speed and the position of the piston. Knock Sensor1(KNOCK1) A sensor that is mounted on the cylinder block, sensing knocking of the engine. With the piezoelectric ceramic element, when it senses vibration or pressure from the external, it generates voltage higher than the reference voltage and delivers the voltage to the ECU .

EDL022186A 130 131 128 CAM Shaft Position Sensor (CAM) A sensor that senses the position of the camshaft, allowing it to check the position of each piston by using the reference points with the same basis of the crank EDL022188B shaft position sensor which cannot check the position of each piston. EDL022187A 12 - 14 No ECU PIN Description 1 - Supply voltage(12V) 2 159 Position sensor signal 3 147 Ground No ECU PI N Description 1 136 CRS NEG 2 160 CRS POS - 187 Shield No ECU PIN Description 1 130 Ground 2 131 Accelerometer signal 3 128 Shield (Screen)