12. Electric System Knock Sensor2(KNOCK2) A sensor that is mounted on the cylinder block, sensing knocking of the engine. With the piezoelectric ceramic element, when it senses external vibrations or pressure, it generates voltage higher than the reference voltage and delivers the voltage to the ECU . Inlet Metering Valve (IMV) A valve mounted on the high-pressure pump. It adjusts the fuel volume pumped from the pump to the rail to control the fuel pressure on the rail. 133 132 129 EDL022189B EDL022191A Exhaust Gas Recirculation Valve Position Sensor (EGR) A sensor used to reduce nitrogen oxide ( NOx ) from the exhaust gas.
It recirculates some of the exhaust gas from the engine to the intake side. In this way, the combustion temperature is reduced and the discharged NOx is reduced. EDL022190A 12 - 15 No ECU PIN Description 1 164 Supply voltage(5V) 2 193 H-Bridge NEG 3 172 Ground 5 116 Position sensor signal 6 192 H-Bridge NEG No ECU P IN Description 1 133 Ground 2 132 Accelerometer signal 3 129 Shield (Screen) No ECU PIN Description 1 - Supply voltage(12V) 2 177 PWM signal