13. Others/Driving System Crankshaft Pulley Disassembly of Crankshaft Pulley CAUTION 1. Remove the crankshaft pulley. Be careful not to damage the oil seal. Fix the crankshaft to allow the flange hex bolts to be tightened with the specified torque. A B EDL013033A 1) Loosen the flange hex bolt (B). 2) Remove the crankshaft pulley (A). CAUTION Be careful not to damage the oil seal. Assembly of Crankshaft Pulley 1. Attach the crankshaft pulley. A B EDL013033A 1) Align the crankshaft pulley (A) to the pin and attach it. 2) Apply LOCTITE Blue 587 to the inside of the 3) Tighten flange hex bolts (B) at a tightening torque flange hex bolts (B). of 26 kgf m. 13 - 13