4. Regular Inspection Regular Inspection General Information CAUTION General Information Incorrect inspection methods may cause of engine faults. As time passes after purchasing an engine, each of the engines parts age and initial engine performance cannot be maintained. Regular inspection and replacement according to the recommended regular inspection table allows you to maintain an engine with the optimum conditions and best performance for a long period and prevent unexpected accidents in advance. Users are responsible for the proper operation and maintenance of engines.
Engines should be inspected and replaced by officially-certified technicians in a workspace with the specified tools and facilities. Observe the following instructions to perform inspections. 1. Perform inspections on a flat floor without a slope. Cleaning an engine with liquids such as water or wax may cause breakdown of electrical parts. Be careful when handling batteries, cables, and electrical wirings because current flows through those parts. Do not put heavy things or apply excessive force or impact on the fuel-related units. Make sure that you connect the battery terminal ('+' and '-') to the right terminal.
Connecting the '+' and '-' terminals to the wrong terminal may cause damage to the electrical unit parts and fire. 2. Excluding extreme circumstances, only perform inspection while the engine is stopped. Routine Inspection 3. Disconnect the '-' terminal of the battery before Routine inspection is an inspection performed by an engine operator before operating the engine. It should be performed to protect operator's safety, as well as the engine. The following is a minimal check list. 1. Check whether the engine smoothly starts and the performing an inspection. 4. Perform inspection in a well ventilated space. 5. Use a wooden prop or lift when working under the engine.
DANGER levels of fuel, oil, and coolant are within the normal range. Wait until the engine is sufficiently cooled before starting inspection after operating the engine. Otherwise, you may be burned. 2. Check if any discharged emissions are colored and if the exhaust contains toxic gas elements. You may be poisoned by the emission when starting an engine in a closed space. Perform inspection at the well-ventilate space. 3. Check whether abnormal noise occurs after starting an engine or not. 4. Check whether oil or water is leaking. Unless absolutely compelled, do not perform inspection under an engine. Do not be close to fire when inspecting an engine.
Fuel, oil, or batteries may generate gas, causing fire. If inspecting the engine while it is running, do not wear accessories such as necklaces, rings, watches or gloves. Such accessories may become stuck in rotating parts while the engine is running and may cause serious bodily injury. Individuals who use a mechanical heart or artificial internal organ should not enter the area near an engine while it is running. The high-voltage current of the injectors or ECU may cause abnormal operation of such equipment. 4 - 3