4. Regular Inspection Fuel General Information Fuel quality is an important factors in satisfy standards for engine performance, engine lifetime, and emissions. Doosan engines are designed to use diesel fuel available in the area where the engines are sold. CAUTION Use clean, specified, and qualified fuel only. Using irregular or unspecified fuel may cause critical damage and faults to the engine. Inject fuel while the engine is stopped. Fuel Standards To maintain the optimum engine performance, refer to the following recommended fuel table to select the appropriate fuel. Ultra Low Sulfur Diesel Note) The fuel product level has been prepared based on SK Ultra Low Sulfur Diesel.
4 - 14 Fuel Ingredients Standard Specific Gravity (kg/lit) 0.820 ~ 0.845 Fire Point (°C) Above 40 Viscosity (40 °C) (cSt) 1.9 ~ 5.5 Sulfur Content (wtppm) Below15 Cloud Point (°C) - Pour Point (°C) Below-17.5 Low temperature filter (°C) clogging point Below-16 Color (ASTM) Below 2.5 Residual carbon (10%) (%) Vapor/residual fraction (wt) Below0.15 Total acid value (mg KOH/g) Below0.40 Back plate corrosion rate (100 °C, 3 hours) Below 1 Ash Content (mass %) Below0.01 Moisture and (vol. %) Precipitation Below0.02 Cetane Index Above 45 Distillation Test Temperature 50 % Distillation Point - 90 % Distillation Point Below360