5. Failure Diagnosis P0088 Rail pressure control fault 1. Overview 2. Condition for Running Diagnostic During engine running 3. Condition for Setting the Fault Code If the feedback rail pressure of rail pressure sensor is out of the threshold during restricted condition, fault code is raised. 4. Condition for Clearing the Fault Code If the feedback rail pressure of rail pressure is within the threshold during restricted condition, fault code is cleared. 5. Inspection Items 1) A 5 - 20 Code Causes Impact P0088 Faulty IMV (sticking,leaking etc), Faulty rail pressure sensor. (Aged or malfunction) Faulty Injector LPC(Low pressure circuit)problem.
(leakage, fuel is not supplied due to some reason.) HPC(High pressure circuity)problem.(leakage etc) CE lamp Flashing Torque Reduction Lv1 Delay engine stop NO ECU Pin Description 1 138 VREF1 Rail Pressure Sensor 2 119 Rail Pressure Sensor Return 3 135 Rail Pressure Sensor Step Inspection Standard Value YES NO 1 P0088 is occurred on diagnostic tool? Step 2 O.K 2 After let the machine be in safety area and turn-off the key switch. Step 3 3 Please do visual inspection throughout all fuel line. (Low pressure circuit & high pressure circuit) Is there any leakage or blocking of fuel? If you cannot find with your eyes, You can check leakage during engine running in machine stationary condition.
Step 4 Step 5 4 Please fix the leakage. After fix the problem, start the engine and change the RPM from low idle to high idle. Please keep the RPM as a high idle at least 10 minutes. Fault code is cleared? O.K Step 5 5 Please do the Shut off test & Run up test for detecting which injector has fault or not. Do you find faulty injector? Step 6 Step 7