Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION REMARK the oil level with dipstick (G1) or the LOW TEMP scale on sight gauge (G2). 2. If the oil level is low, add oil through oil filler (F).

NOTICE CHECK OIL LEVEL IN HYDRAULIC TANK, ADD OIL WARNING 3 - 73 When checking the oil level after th e engine has been operated , wait for at least 15 min utes after stopping the engine The di stoppe d, and ENGINE IDLING for measuring when the engine When checking the oil level, stop th e engine and check with the ENGINE STOPPED sid It is als o possible to check when th e engine is idling, but the following procedure must b • Chec k that the engine water temp erature is in the white range • Use t he ENGINE IDLING side of • Rem CHECK OIL LEVEL IN TRANSMISSION 1.

After s tarting the engine, run the en The oil l evel changes according to the oi l temperature, so check the l evel aft er completing the warming-up o When id scale. When remo ving the oil filler cap, oil may spu rt out, so turn the cap slowly to r elease the internal pressure before removing the cap. 1. Check with sight gauge (G1). 2. If the o il level does not reach the wi ndow of gauge (G1), add throug h oil filler (F). 3. When checking the oil level after ad (G2).