Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION · m (95 kgf · m, 687.1 lbft). If any wheel bolt is broken, replace all the wheel bolts for that wheel. If the Komatsu distributor. 3 - 75 HECK WHEEL HUB BOL TS, TIGHTEN heck for loose bolts. If any are found, tighten them. ightening torque: 824 to 1030 N·m (84 to 105 kgf·m, 607.6 to 759.5 lb sert a socket wrench in a pipe, and apply a force of 93 2 N (95 t a point 1 m from the ful crum to give a tightening torq ue of 932 hen tightening the hub bolts after replacing the tires , travel f or 6 km, then check the ti ghtening torque to ensure th at there o loose bolts.

HECK CENTRAL WARNING LAMP, ALARM BUZZER, MONITOR LAMPS AND METERS efore starting the engine, turn the starting switch to the ON osition, press machine monitor check switch (1), and check that ere is no failure in any monitor lamp. any instrument does not work, there is probably a failure, so lease contact your Komatsu distributor for inspection. efore starting the engi ne, turn the starting switch to the HECK BRAKING EFFECT heck that the parking br ake, foot brake, and retarder brake there is any abnormality , please contact your Koma HECK EMERGENCY STE 1. Turn starting switch k 2.

Turn emergency stee steering wheel can be If the steering wheel c annot be operated, please c ontact HECK BACKUP ALARM ng switch to the ON position. 1. Turn the engine starti ng switch to the ON position 2. Place the gear shift le ver in the R position and ch eck that the backup alarm is worki