. OPERATION OPERATION CHECK ELECTRIC WIRING WARNING NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 to +0.03 MPa (0.3 kgf/cm 2 , 4.3 PSI) of the value in the table above. 3 - 76 If the fuses frequentl y blow or if there are t races of sh ort circuit s in t he electrical wiring, locate the cause and immediately perform rep airs, or c ontact you r Komatsu d istributor fo r repairs. Keep the to p surface of the batt ery clean an d check the breather h ole i n the battery cap.
If i t is clogged with dirt o r dust, wash the b attery cap to cle an the bre ather Check for da mage a nd wrong capacity o f the fuse and any sign of wiring. Chec k also fo r loose te rminals and tighten a ny loose part Check the wi ring of th e "batter y", "starting motor"an d "alternator"carefully , in particular Always chec k if there is any ac cumulatio n of flammable material around t he battery , and remove such flammable material. ct your Komatsu distributor for investigation and correction of any abnormalities found.
Please conta ct your Komatsu distributor f or investigation and correction o f any abnormalities CHECK INFLATION PRESSURE OF TIRES Measure the inflation pressure with a tire pressure gauge , while t he tires are cool, b efore starting work Check for da mage or wear to t he tires an d the rims Check for loo se whee l hub bol The proper in flation p ressure i s shown be Tire size Inflation pressure [MPa (kgf/cm2, PSI)] 26.5-R25 VLT (standard) 0.44 (4.5, 63.9) 26.5-R25 VKT (standard) 26.5-R25 XADT (standard) 26.5-R25 RL2+ (standard) 800/65 R29 (if equipped) 0.39 (4.0, 56.8)