Komatsu — CHECKS AFTER STOPPING ENGINE

. OPERATION OPERATION STOPPING ENGINE NOTICE If the engine is suddenly stopped without allowing it to cool down, there is danger that the life of the engine parts will be shortened, so never 3 - 85 stop the engine su Allow the engine t After the engine is ddenly except in emergenc o cool down gradually befo stopped, the dump body is regardless of the position of the dump lever. Set the dump leve r to the FLOAT position, l ower the dump body, then s 1. Set the shift lev er to the N position, the n set the parking brake switch to the P 2. Lower the dum position. 3. Run the engin gradually. 4. Turn the key o f starting switch (1) to th e OFF position to stop the engine. 5.

Remove the ke y from starting switch (1 the HOLD CHECKS AFTER STOPPING ENGI NE 1. 2. 3. 4. 1. Walk around th e machine and check th e work equipme nt, bodywork, and undercarria ge, and check also for oil and water leak age. k. ine compartment for paper and debris. Clean out any paper and debris to avoid a fire hazard. ud affixed to the undercarriage. 2. Fill the fuel tan 3. Check the eng ine compartment for pap er and debris. C lean out any paper and debris 4. Remove any m ud affixed to the underc