. MAINTENANCE GUIDES TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance performed. KOMATSU GENUINE OILS: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. OIL CHANGE: 4 - 2 GUIDES TO MAINTE Do not perform any inspection a nd maintenance operation that is not foun d in this to be KOMATSU GENUINE REPLACEMEN T PARTS: Use Komatsu genuine parts sp ecified in the Parts Book as replacement p ALWAYS USE CLEAN WASHER FL UID: Use automobile window washe r fluid, and be careful not to let any dirt get ALWAYS USE CLEAN OIL AND GRE ASE:
Use clean oil and grease. Also, keep the containers of the oil and grease c lean. Keep foreign materials away from oil and grease. CHECKING FOREIGN MATERIALS I N DRAINED OIL AND ON FILTERS: After changing the oil or replacin g the filter, check the drained oil and filter f or metal particles a nd foreign materials. If large quantities of metal partic les or foreign materials are found, always report to the perso n in charge and carry out suitable action. In addition, when replacing the engine oil filter, fill the n ew filter with the sp ecified clean oil, then install it. If your machine is equipped wit h a fuel strainer, do not remove it while fue WELDING INSTRUCTIONS: witch.
V continuously. Turn off the engine starting s Do not apply more than 200 Connect grounding the cable within 1 m (3.28 ft) from the area to be we lded. Connecting grounding cable near meters and connectors will le ad to the failure of meters. If a seal or bearing happens t o come between the part being welded and grounding point, c hange the grounding point to avoid such parts. he pins or the hydraulic cylinders as the grounding point. the plated portion. Do not use the area around t he pins or the hydraulic cylinders as the gr ounding point. Sparks will cause damage to DO NOT DROP THINGS INSIDE MA CHINE:
When opening inspection win dows or the oil filler port of the tank to car ry out inspection, b e careful not to drop nuts, bolts, or tools inside the If such things are dropped ins lead to failure. If you drop an machine. ide the machine, it may cause damage an d/or malfunction of the machine, and will ything inside the machine, always remove it immediately. inspection. Do not put unnecessary thing s in your pockets. Carry only things whic h are necessary for inspectio