Komatsu — GUIDES TO MAINTENANCE

. MAINTENANCE GUIDES TO MAINTENANCE etc. have been clean the mounting surface, and 4 - 3 DUSTY WORKSITES: as follows: tly to see if the air cleaner is clogged. shorter interval than specified. to avoid clogging. equently. ecially the starting motor and alternator, to avoid accumulation of dust. When working at dusty worksites, do Inspect the dust indicator frequen Clean the air cleaner element at a Clean the radiator core frequently Clean and replace the fuel filter fr Clean electrical components, esp ecially the starting motor and alternator, to a void ac cumulation of dust.

When inspecting or changing the oil, move the machine to a place that is free of dust t o prevent di rt from getting into the oil. AVOID MIXING OILS: If a different brand or grade of oil has to be added, drain the old oil and replac e all t he oil wi th the new b rand or grade of oil. Never mix different brand or gr ade of oil. LOCKING INSPECTION COVERS: Lock inspection cover securely into position with the lock bar. If inspection or maintenance is performed with with inspection cover not locked in positio n, there is a danger that it may be suddenly blow sh ut by t he wi nd and cause injury to the worker.

BLEEDING AIR FROM HYDRAULIC CIRC If the hydraulic components have b disconnected, it is necessary to blee d air in the circuit. See "WHEN REQUIRED (PAGE 4-21)" PRECAUTIONS WHEN INSTALLING HYD When removing parts at location replace with new parts. When doing this, be careful not to forget to assemble the O-rings and gaskets When installing the hoses, do not twist or bend them into loops with a small ra This will cause damage to the hos e and drastically reduce its service life. CHECKS AFTER INSPECTION AND MAIN TENANCE: If y ou forget to perform the checks aft er inspection and maintenance, unexpected problem s may occur , and this may lead to serious injury or property da mage.

Always do the following: e stopped) enance points been forgotten? nance items been performed correctly? Checks after operation (with engin Have any inspection and maint Have all inspection and mainte Have any tools or parts been d inside the machine and get ca Are there any leakage of coola Have any inspection and maint Have all inspection and mainte nance items been performed correctly? Have any tools or parts been d ropped inside the machine? It is particularl y dangerous i f part s are dropped ught in the lever linkage mechanism. nt or oil? Have all nuts and bolts been tightened? Are there any leakage of coola nt or oil?

Have all nuts and bolts been t Check when the engine is running See "TWO WORKERS FOR M safety for checking when the e Check if the inspected and ser Increase the engine speed to c See "TWO WORKERS FOR M AINTENANCE WHEN ENGINE IS RUNNIN G (PAG E 2-31)" in the sectio n on ngine is running. Pay enough attention for s Check if the inspected and ser Increase the engine speed to c