Komatsu — CHECK, CLEAN AND REPLACE AIR CLEANER

. MAINTENANCE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN OR REPLACE AIR CLEANER WARNING get into the engine and damage it. transparent portion of dust 2 O) 2 O) (0.076 the air cleaner element press the top of dust 4 - 21 If Alway s stop the engine before carryin When using compressed air, there is danger that dirt may be blown arou nd and cause s Alway s use protective glasses, dust m ask, and other protective equipme CHECKING 1. Check that the red line in the indicator (1) does not indicate 0. (0.076 kgf/cm2, 1.1 PSI). 2. If the red line indicates 0.0075 M kgf/cm2, 1.1 PSI), clean or rep immediately. 3. After checking, cleaning, or rep indicator (1) to return the red line 1. i ( 2. I i 3.

i 1. ndicator (1) does not indicate 0. 0.076 kgf/cm2, 1.1 PSI). 2. I f the red line indicates 0.0075 M kgf/cm2, 1.1 PSI), clean or rep mmediately. After checking, cleaning, or rep 3. After ndicator (1) to return the red line NOTICE clean the element until the dust indicator shows 0.0075 MPa (30 INCHES H O) (0.076 kgf/cm2, 1.1 PSI).

2 lement is cleaned frequently before the dust indicator shows 0.0075 MPa (30 INCHES H O) (0.076 kgf/cm2, 1.1 PSI), the 2 D o not clean the element until the dus t indicator shows 0.0075 MPa (30 I If the e lement is cleaned frequently be fore the dust indicator shows 0.00 75 MPa (30 INCH ES H O) (0.07 2 6 kgf/cm2, 1.1 PSI), the ai r cleaner will not be able to display its basic performance fully, and th e cleaning effici ency will also go down. In addition, during the cleaning operation, more d irt stuck to the element will fall ins ide the inner el ement.

If the p ressure rises to 0.005 MPa (20 IN CHESH O) (0.051 kgf/cm2, 0.7 PSI) 2 immediately aft er it is cleaned, replace th e air cleaner elements (outer element and inner ele ment). Even if the rise in pressure is slow, replace the air cleane r element once a year.