Komatsu — CHECK BRAKING CAPACITY OF RETARDER BRAKE

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF FOOT BRAKE WARNING CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING 4 - 45 If the m achine moves, it will lead to serious inju ry. If machi ne begins t o move during the inspection of braking capacity, lo wer the engine speed i mmediate ly, set shif t lever at N p osition, an d then set parking brake switch at PARK Check the braking ca pacity of t he foot bra ke as follo ws. 1. Sto 2. Se spe spe 3. Lo the If a rep 1. Sto p the machine on flat gro und and de press ser vice brake (1). t shift lever (2) ed. If the ma ed reaches 13 to the D p chine doe 00 rpm, it osition, gr s not move is normal.

adually raise the engine even when the engine wer the engine n set parking b ny abnormalit lever at N osition. Komatsu NOTICE There is dange r of dama ge inside th e transmiss ion, so alwa ys do t his with the shift lever at the "D" p osition. Do not use an y other position . If the m achine moves, it will lead to serious inju ry. If machi ne begins t o move during the inspection of braking capacity, lo wer the engine speed i mmediate ly, set shif ting lever at N position, and then d epress the foot brake. Check the braking ca pacity of t he retarde r brake as follows. 1. Sto (1) 2. Se spe spe 3. Lo an rep p the fully.

t shift machine on flat ground and pull retarder control lever lever (2) to the D position, gradually raise the engine ed. If the ma ed reaches 13 wer the engine chine doe 00 rpm, it speed, s s not move is normal. et gear shi even when the engine ft lever at N position. If y abnormality is found, ask your Komatsu distributor for air. NOTICE There is dange r of dama ge inside th e transmiss ion, so alwa ys do t his with the shift lever at the "D" p osition. Do not use an y other position .