. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF PARKING BRAKE WARNING 1. Stop the machine on flat ground and set parking brake switch (1) to PARKING. 2. Set shift lever (2) to the D position, gradually raise the engine speed. If the machine does not move even when the engine speed reaches 1400 rpm, it is normal. 3. Lower the engine speed, set gear shift lever at N position. If any abnormality is found, ask your Komatsu distributor for repair. NOTICE position. CHECK WEAR OF PARKING BRAKE PADS WARNING 4 - 46 If the machine moves , it will lead to serious inj ury.
If machine b egins to move during the inspection of braking capacity, lo wer the engine speed immed iately, set shifting lever a t N position, an d then depress Check the braking capacity of the parkin g brake as There is danger of da mage inside the transmis sion, so always do thi s with the shift lever at the "D" p osition. Do not use an y other Never put any oil or g rease on the surface of t he pad o r disc. Measure the thickn ess of the pad, and if it is less t han 1. 5 mm (0.06 in), contact your K