. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 5. Pour in the specified amount of engine oil from oil filler (F). 6. Remove the cap installed to bleeder screw (3), then insert a vinyl hose. Prepare a container with oil in it and insert the other 4 - 59 end of the oil. (Use Start the hose approx. 50 any commercially engine, loosen bl mm (2.0 in available eeder scr ) belo vinyl ew (3 and keep out from t Tighten bl the engine r he vinyl hos eeder screw 9. After addi ng oil, check that the oil is a t the specified level . See "CHECK OIL LEVEL RANSMISSIO (PAGE 3-