. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN BRAKE OIL TANK, REPLACE BRAKE OIL FILTER ELEMENT WARNING engine is stopped, and may cause burns. Wait for the CASE, CLEAN again. 3. Remove filter case (1). 4 - 60 The ediatel temperature to go down before starting the work When removing the oil f iller cap, turn it slowly to releas e the internal Prepare a filter wrenc Refill capacity: 115 lit ers (30.38 US gal) (in cluding transmission To drain all the oil, c arry out the procedu re for Item "CHANGE OIL IN TRANSM same time. TRANSMISSION CASE STRAINER (PAGE 4 -58)" at the same 1. Depress the brake p edal at least 20 times to reduce t he pressure inside the brake co 2.
Set the container to catch the oil directly u nder d rain plug (P). plug 4. Take out the eleme nt and wash the i nside of the filter case. Replace O-ring (2) and backup ring (3) o n the fi ase with new parts, coat thinl y with clean oil, t hen i nstall. 5. Assemble a new ele ment in the filter cas e, coat the element thinly w Tightening torque: 7 ( the element thinly w ith clean oil, then inst Tightening torque: 7 8 to 10 kgf·m, 57.9 to 72.3 lb O-ring of