Komatsu — REPLACE INJECTOR ASSEMBLY

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK WARNING stopped, and may cause burns. Wait for the CHECK FAN PULLEY AND TENSION PULLEY Check for play of the pulley and leakage of grease. If any abnormality is found, please contact your Komatsu distributor. 4 - 72 EVERY 4000 HOURS SERV Maintenance fo r every 50, 250, 50 0, 1000 and 2000 h ours se rvice should be carried out at the The parts and oil are at high tem temperature to go down before star ting the work. When removin g the oil filler cap, tu rn it slowly to release t he inter nal pressure, t Refill capacit y: 180 liters (47.56 1. Lower the d ump body and sto p the engine 2.

Turn the c ap of oil filler (F) t oving the cap. e not to get any oil before rem 3. Taking car drain the oi l, then tighten the p 4. Pour in the specified amount of engine oil from oil filler (F 5. After addin g oil, check that the oil is at the specifie d level . For details of the oil to use, see "CHEC K O IL LEVEL IN LEVEL HYDRAULI C TANK, ADD OIL (PAGE 3-73)". CHECK WATER PUMP Check for play in the pulley, leaka ge of grease or wate r, or cl ogging of th e drain hole. If any a bnormality is found, contact your Ko matsu distributor f or disassembly and repair or replacement.

CHECK AIR COMPRESSOR Ask your Koma tsu distributor to c arry out this work CHECK VIBRATION DAMPER There is the po ssibility of drop in th e level of the dampe r fluid a nd runou t of the concave surface. So, please contact your Komatsu distributor to inspec t or replace. CHECK INJE See Section "B REGULATION AR EA (PAGE REPLACE INJECTOR ASSEM See Section "A REGULATION AR EA (PAGE