Komatsu — METHOD OF USE

. ATTACHMENTS, OPTIONS HANDLING TACHOGRAPH (TCO20-90W) REPLACING CHART PAPER CAUTION 1. Open up the tank cover. 2. Turn crimped ring (1) to the left, then move it up to remove it. 3. Always use a ballpoint pen to write the employee code, machine code, date, etc. on the new chart paper. 6 - 7 When replacin g the chart paper, do not touch the e dge of the cutter. There is a protective cov er, but ther e is still danger of cutting your finger by NOTICE Komatsu genuine chart paper. If any other chart paper is used, it may cause failure of the tachograph. Always use Komatsu genuine chart paper.

If a ny other chart paper is used, i t may cause failure of t When adju sting the time on the chart paper bet ween 22:40 and 24:00, always set the cutt er at the bo ttom of the first s hee t of chart paper . If it is set wrongly, the speed indic ator will catch and cause failure. Always star t with the top sheet when using the c hart paper. Do not cut the connecting tap e to separat e the chart p aper a nd use one sheet a t a time. This will cause the paper t o catch and this will resul t in failure of th Always rem ove and install the crimped ring by Always use Komatsu genuine chart paper (Y Z762928-260). Adjust the ti me before replacing the chart pap er.

If the time is adjusted after the ch art paper i s set in position , there will be a diffe rence between the correct time and the set time for the chart paper. Be careful n ot to bend the chart paper, dam age the surface, or get water on the p aper. It w ill become impossible to obtain a c orrect record. 4. Insert th e outside portion of the chart pa Align wit the chart h chart paper mount (3) of the ta paper. 5. Turn the time sca on the ta chart paper and align the presen le on the chart paper with the ti chograph.