Komatsu — METHOD OF USE

. ATTACHMENTS, OPTIONS HANDLING TACHOGRAPH (TCO20-90W) ATTACHMENTS, OPTIONS HANDLING TACHOGRAPH (TCO20-90W) Pressed crimped ring (1) down with your finger and turn it to the right to install it. 7. Close the cover. REPLACING LAMP 1. Open up the tank cover. 2. Insert a coin in the groove of lamp socket (1) and turn it to the left. 3. Remove lamp socket (1). 4. Align projecting portion (3) of the lamp socket with groove (2) of the tachograph lamp mount, then insert the lamp bulb. 5. Use a coin to turn lamp socket (1) to the right and secure the lamp socket in position. 6. Close the cover. 6 - 8 6.

Set p rojecting portion ( 4) of th e crimped r ing at the bottom, and align with t he groove o f chart pape r mount ( STORING CHART PAPER Kee p the char t paper in a place w here there is n o direct sunlight, where no water can get on the paper, and where ther e is n o hig h humidity. Select a place where there is good ventilation and low humidit y. NOTICE The t achograph illumination l amp is 2 4V. N ever use a lamp of the wrong If the wron g lam p is used, the heat fro m the lamp will cause failure of the Part name Color of socket Rating 24V lamp Dark brown 24V 1.4W