03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Idle Gear 2 and Hydraulic Pump Base Assembly (for Side PTO Model) 1. Remove the hour meter gear case (if equipped). 2. Remove the gear case cover (1). 3. Remove the hydraulic pump base assembly (2). 4. Remove the idle gear 2 stopper (3). 5. Remove the idle gear 2 (4) using the puller (5). 6. Remove the idle gear 2 shaft (7). (When reassembling) Replace the washer (6) and gear case cover gasket. Replace the gear case cover gasket with new one.
(1) Gear Case Cover (2) Hydraulic Pump Base Assembly (3) Idle Gear 2 Stopper (4) Idle Gear 2 (5) Puller (6) Washer (7) Idle Gear 2 Shaft (8) Idle Gear 2 Stopper Set Screw (9) Idle Gear 2 Shaft Set Screw W1034122 S-59 KiSC issued 07, 2008 A Tightening torque Idle gear 2 shaft set screw 24 to 27 N·m 2.4 to 2.8 kgf·m 18 to 20 lbf·ft Idle gear 2 stopper set screw 49 to 55 N·m 5.0 to 5.7 kgf·m 37 to 41 lbf·ft