Kubota — SERVICING

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Camshaft Side Clearance 1. Set a dial indicator with its tip on the camshaft. 2. Measure the side clearance by moving the cam gear to the front to rear. 3. If the measurement exceeds the allowable limit, replace the camshaft stopper. W1030012 Camshaft Alignment 1. Support the camshaft with V blocks on the surface plate at both end journals. 2. Set a dial indicator with its tip on the intermediate journal. 3. Measure the camshaft alignment. 4. If the measurement exceeds the allowable limit, replace the camshaft. W1031413 S-82 KiSC issued 07, 2008 A Camshaft side clearance Factory spec. 0.070 to 0.22 mm 0.0028 to 0.0086 in.

Allowable limit 0.30 mm 0.012 in. Camshaft alignment Allowable limit 0.01 mm 0.0004 in.